LATEST NEWS

Panasonic has revealed the technical specifications of the AG-3DA1, the world’s first professional quality fully intergated Full HD 3D camcorder offering SD media card recording.

D10CE                                Universal SDI to Analog converter
	The D10CE SDI to Analog Video Converter provides excellent quality 10-bit conversion of SDI to both component and composite video formats simultaneously. The component outputs are user configurable to YPbPr, (SMPTE, EBU-N10), Betacam, or RGB (or composite YC). The composite output is user configurable to composite video or sync. The component and composite outputs are completely independent including optimum chroma filtering for each and independent pedestal configuration. The D10CE also features an exclusive PLL jitter filter/memory to reduce the effects of SDI jitter on the output analog video. This feature, along with the precision 4x oversampled D/A filters, provides the highest quality analog outputs including very low phase noise in composite outputs. The D10CE also provides two re-clocked, loop-thru SDI outputs. All functions are user configurable via dipswitches. PRICE   494 EUR (Exc VAT)  User manual

D10C2                                SDI to Analog Component/Composite Converter
	The D10C2 SDI to Analog Video Converter provides excellent quality 10-bit conversion of SDI to analog component or composite video at a low cost. In the Component mode, the D10C2 outputs are user configurable to YPbPr (SMPTE, EBU-N10), Betacam, or RGB. In the Composite mode, the D10C2 provides 2 composite outputs and a YC (S-Video) output. The D10C2 also provides two re-clocked, loop-thru SDI outputs and a composite sync output (Component mode). All functions are user configurable via dip-switches. PRICE   399 EUR (Exc VAT)  User manual

D10CEA                              SDI to Analog Audio/Video
	The D10CEA converts SDI video with embedded audio to component or composite analog video and 4 Channel balanced analog audio. The video outputs can be configured as YPbPr (Betacam or SMPTE/EBU-N10), RGB, composite or YC (S-Video). The analog audio outputs can be wired in a balanced or unbalanced configuration. The 4 audio channels can be selected from group 1-4. Audio and video output connections are available on a 25 pin "D" subminiature connector (breakout cable supplied). All video/audio configuration is done by external dipswitch selection. This versatile, low-cost, miniature monitoring solution also outputs two re-clocked loop-thru SDI outputs. PRICE   600 EUR (Exc VAT)  User manual

D10C            Serial to Composite Analog to SDI Converter
	The D10C SDI to Analog Converter provides excellent quality 10-bit digital to analog conversion at low cost. The D10C is useful for D/A conversion, high quality monitoring, or adding an SDI input to VTRs, worlstations, or other analog video equipment. The D10C automatically works with component or composite SDI inputs in 625 or 525 line formats. It features one SDI input with two re-clocked, loop-through SDI outputs. The D10C also acts as a distribution amplifier/repeater. The D10C provides a component analog output for component SDI inputs (D1), a NTSC output for 525 line composite SDI inputs (D2,D3), and a PAL output for 625 line composite SDI inputs (D2,D3). PRICE - 590 EUR (Exc VAT)

D10AD                              Component or Composite Analog to SDI Converter
	The D10AD provides excellent quality 10-bit conversion of component or composite analog video to SDI. The D10AD accepts YPbPr (SMPTE, EBU-N10), Betacam, or RGB component inputs and NTSC/PAL or YC (S-Video) composite inputs. The D10AD features a 3 Line Adaptive Comb Filter for high quality decoding of composite sources. The comb filter can be switched to 2 line or notch modes for minimum delay requirements. NTSC/PAL configuration is automatic. Video format, AGC, and pedestal are all user configurable via dipswitches. PRICE   494 EUR (Exc VAT)  User manual

D10A                                   Component Analog to Serial Converter
	The D10A provides excellent quality component analog to 10-bit serial digital conversion in a small, low cost package. The D10A works with RGB or YPbPr component analog inputs (including Betacam and MII) in 525 or 625 line formats. The D10A has one component analog input (3x BNC), one external sync input, and three SDI outputs. Input format can be chosen by internal jumpers and level/gain controls.  PRICE - 655 EUR (Exc VAT)

D5D                          NTSC/PAL to Serial Decoder
	The D5D Decoder provides low cost, all digital decoding of analog NTSC/PAL or Y/C (S-Video) to SDI. The D5D is useful for bringing video from time-base corrected analog composite equipment into a serial digital environment. The D5D features a crystal PLL jitter filter/memory to reduce jitter in the SDI outputs. The D5D decodes the full dynamic range of input video. Values below black and above white are not clipped. In the NTSC mode, the removal of the 7.5 IRE pedestal can be enabled by external dip-switch selection. PRICE - 440 EUR (Exc VAT) User manual

D5CE                                  Serial to NTSC/PAL or Component Converter
	The D5CE provides low cost, all digital conversion of SDI to either composite or component analog video. Three analog BNC outputs are user configurable to cover a wide range of format combinations including 3 composite, 1 composite and Y/C, YPbPr (SMPTE, EBU-N10), Betacam, or RGB. The D5CE also features a re-clocked, loop-thru SDI output. The D5CE automatically adapts to NTSC or PAL video standards. Pedestal and narrow/wide H/V blanking are user configurable via dip-switches. PRICE   285 EUR (Exc VAT)  User manual

D4E                                     Serial to NTSC/PAL Encoder
	The D4E SDI Encoder provides the lowest cost all-digital conversion of SDI to analog NTSC or PAL. The D4E is useful for monitoring, level and phase checking, dubbing etc. The D4E automatically adapts to NTSC or PAL video standards and outputs analog NTSC (525 line inputs) or PAL (625 line inputs). Pedestal and narrow/wide H/V blanking are user configurable via dip-switches. The D4E encodes the full dynamic range of input video. Levels below black and above white are not clipped. PRICE   190 EUR (Exc VAT)  User manual

D5DA                                  Serial distribution amplifier
	The D5DA is a multi-format, 1x4 reclocking SDI Distribution Amplifier. The D5DA can be used as a low cost SDI DA or repeater. The SDI input is re-clocked and equalized to 300 meters of cable. In addition, the multi-standard feature allows the D5DA to automatically adapt to 143, 177, 270, or 360Mb SDI inputs. PRICE  189 EUR (Exc VAT)

D5PSW                               SDI protection switch
	The D5PSW accepts 2 SDI inputs, Primary and Secondary, and automatically switches to the Secondary input if the Primary input is not present or is not a valid SDI signal. An SDI input is considered valid if a proper SMPTE 259 stream is present. A LED indicator is Green if both Primary and Secondary are present, flashing green if the Primary is present but the Secondary is not present, and Orange if the Secondary is present but the Primary is not. The D5PSW has 3 SDI outputs. PRICE   360 EUR (Exc VAT) User manual